Klutch 48575, Руководство пользователя

Страница: 15 / 20

15
7. It is advisable to drain the bowl every day. The frequency of draining can be decided based on
the condensate collection.
8. Take care that the condensate level does not exceed the Max Level mark on the bowl guard.
9. To adjust the oil flow, turn the lubricator knob to adjust the oil drops to your need: clockwise to
decrease and counter-clockwise to increase the oil flow.
Note
: The lubricator is designed for best performance with a 32-grade oil.
Troubleshooting
Air Filter
Refer to the
Air Filter’s Parts Diagram and Parts List. Use the table below to troubleshoot problems before
contacting a technician or your local dealer. If the problem continues after troubleshooting, call your local
dealer for assistance.
Problem Cause Solution
1. Restricted air flow.
Filter element (5)
clogged. Clean the filter element and
replace.
2. Water level not visible.
Dirt on the inner surface
of the polycarbonate
bowl (7.1.1).
Clean the polycarbonate bowl.
3. Air leaks from housing (1) and
metal bowl guard (7.3) interface.
O ring (7.1.2) damaged. Replace the O-ring.
4. Air leaks from the bottom of the
metal bowl guard.
O ring (7.2.3) damaged. Replace the O-ring.
5. Air leaks continuously through the
drain valve assembly (7.2). Drain valve assembly
damaged. Replace the drain valve
assembly.
6. The knob of drain valve does not
return. Valve components
stuck.
Pull the knob and operate. If the
valve gets stuck again - replace
the semi auto drain valve
assembly.
Air Regulator
Refer to Figures 2 & 3
Problem Cause Solution
1. Continuous flow/
leak through the
knob.
1. Diaphragm assembly (9) is damaged. Replace diaphragm assembly (9).
2. The seating on the valve cone is
damaged.
Replace the valve cone assembly
(13).
3. Dirt found in between the seating and
the valve cone (13).
3. Clean and reassemble.