9
Installation
These procedures must be carried out exclusively by a quali
�
ied technician. Appliance must be install right way
as law at it stands.
Positioning the hob in the worktop
Any kind of worktop which is stabilized the temperature of 90 can be used. Dimensions of
�
igures are shown
at page of 8.
• If the hob will install without an oven under it, panel should be used to separate the subidivision of hob and
surface of worktop with distance at least 10 mm.
• If the hob will install onto an oven, distance should be 15 mm and instructions for use should be followed.
Electricity connection should be done stand-alone to assemble and take down of the wiring in all cases.
Place the hob into worktop:
Follow the instructions as follows;
• Cement insulation band, which is given with the product, around of hob hole on worktop to prevent foreign
substance come in between hob and worktop.
• Hob should be placed centre assembly hole carefully.
• Assemly metal sheet can be used to
�
ix the hob.
After -Sales Service:
In order to learn that nearest
Klugmann
Klugmann
application agent, you can call upon application agent's list.
If your list is older than 1-2 year, call
to learn up-to-date service place
and for your problem answer;
Please take into consideration below precaution.
1.
When you buy product, approve guarantee bond to recognized dealer.
2.
You should use the product to manual.
3.
If you have aggregate demand, call upon our telephone number.
4.
Ask technician identi
�
ication card of technician when he comes for service.
5.
Do not forget to ask bill of service aft
er �
inishing act. This bill may help you in the futu
re ı
f there is a
problem your product.
6.
Physical life:10 years.( In order to acting as the product, this is the time spare money's provide time.)
