Revision 5.5
35
5.7
Unpacking the Mirror Joint Arm and Preparing it for Mounting
NOTICE
The mirror joint arm is a precision component. Therefore any mechanical loading should be
avoided while moving or transporting the device or the mirror joint arm.
During transport, the mirror joint arm is not mounted to the device; it is supplied with the
device in a separate packaging.
The lower part of the arm (1) is released from the spring force by means of a latch (2) during
transport. In mounted state, this latch allows force-free movement the arm and return to the
upright parking position when not used.
Fig. 5-3:
Transport position of the mirror joint arm
•
Remove arm from packaging.
•
Make sure that the latch (2) is set to
unlocked
.
•
Rotate the lower part of the arm (1) by approx. 190°. In the last bit of the turn, press
against the spring force, which requires a certain amount of pressure.
•
Turn spring latch (2) from the
unlocked
position into the
locked
position.
—
The spring is tensioned and the arm remains in the position shown in Fig. 5-4.
—
The mirror joint arm can be inserted into the laser surgery device.
