maxium® smart C Electrosurgery Unit with maxium® smart Beam
32
Revision 1
6.2
Connections on the Front
The maxium® smart C by Gebrüder Martin can be equipped with three different versions (m, i and e) of
socket modules for the HF output ports, see section 6.1 “Overview”, page 29.
6.2.1
Monopolar connections
In the socket module of the m-version, the sockets M are suitable
for standard instruments by Gebrüder Martin.
The following cables can be connected here:
•
Connecting cable with circular plug by Gebrüder Martin
•
Connecting cable with US 3-pin plug
•
Instrument with a plain 4-mm connector (banana plug)
For this plug, use the right socket. Insertion into either of the
neighboring control contacts will cause malfunction!
Risk of injury from unauthorized accessories!
On the aftermarket, there are connection cables for bipolar accessories available which can also be
connected to the monopolar standard connector M1 or M2. For safety reasons such cables may not be
used here!
In the socket module of the i-version, the sockets M are suitable for
the international standard.
The following cables can be connected here:
•
Connector cable with 8-mm “Bovie Plug”
•
Connecting cable with US 3-pin plug
•
Instrument with a plain 4-mm connector (banana plug)
For this plug, use the right socket. Insertion into either of the
neighboring control contacts will cause malfunction!
