Klipsch KMC1SU, Инструкция по установке и эксплуатации

Страница: 10 / 17

KMC1SU
8
TUNER OPERATION
Tuner mode options available are TUNE, BAND, PSET and PTY.
BAND
Select a Band
Press the BAND soft button (3) to change between FM or AM bands.
TUNE
Manual Tuning
Press the Tune soft button. Press the |<< or >>| soft buttons to decrement/
increment stations down/ up step by step.
Seek Tuning
Press and hold | << or >>| soft buttons to automatically seek the next or previous
strongest broadcast station.
PSET
PSET mode options available are AS, PS and LIST
AS
Press the AS soft button to automatically select strongest stations and store them
in the preset list for the selected Band. The new stations replace any stations
already stored in that band.
PS
Press the PS soft button to scan stations stored in the current band list. The unit
will pause for ten seconds at each preset station. Press PS again to stop scanning
when the desired station is reached.
LIST
Press the LIST soft button to display the preset list . There are 18 FM and 12 AM
preset locations to store your favorite broadcast stations.
Store a Station
While tuned to the desired broadcast station, rotate the Encoder Knob (9) to
navigate the preset list and highlight the desired preset memory location. Press
and hold the Encoder Knob for 3 seconds or press the SAVE soft button to store
the station. The station frequency will appear in the display adjacent to the preset
memory location number.
Recall a Station
Rotate the Encoder Knob to navigate the preset list and highlight the desired
preset memory location. Press the Encoder Knob to select and tune to the
corresponding stored station.