26
www.klindex.com - Made in Italy
OPERATION
Tool assembly
l
NOTICE
For correct appliance operation, assem-
ble the same tool in all of the tool holders.
The grinding elements must all be of the
same height and wear conditions.
The tool holder (4) consists of a disc with 3 seats (5)
which transfer the drive to all types of tools which can
be fitted onto the appliance:
– position the tool (6) ensuring that the 3 pins (7) are
aligned with the 3 seats (5) on the tool holder
5
4
6
7
– turn the tool (6) to the right (or the left) until it locks.
6
– repeat the operation for all the tools.
Tool disassembly
l
NOTICE
Use gloves when disassembling tools as
they can become hot during grinding op-
erations.
To disassemble the tools, repeat the interventions for
assembly but in the reverse order. If disassembly is
difficult, a rubber mallet can be used.
After assembly and disassembly operations have
been completed, bring the appliance back onto the
floor repeating the operations described above but in
the reverse order.
l
NOTICE
When lowering the appliance, avoid any
brusque knocks to the front wheel.
8.6 Rotation speed and direction
Selecting the direction of rotation and the speed of
the planetary is based on a number of factors, includ-
ing;:
– type, hardness and state of the floor surface to be
treated
– tools used.
HARDNESS OF THE FLOOR
+
-
+
-
ROTATION SPEED
Fig. 1
