16
www.klindex.com - Made in Italy
ASSEMBLY, TRANSPORTATION AND STORAGE
5.3 Moving to the site/work area
The appliance can be moved to the site or work area
in one of the ways indicated below:
– using the radio control
– manually
– lifting the appliance in the case of uneven surfaces
or with obstacles present. Lift the appliance using a
suitable means such as overhead crane, block and
tackle, or forklift as described in section
5.3.1 Moving the appliance with the radio
control
The appliance can be moved in one of the following
ways:
– using the appliance battery energy supply. The ap-
pliance has up to 1.5 hours of autonomy if moved
using just the battery power supply (see the section
"
Appliance battery" on page 15)
– with the appliance connected to the electrical power
supply (see the section "
Connecting to the power
socket" on page24).
l
WARNINGS
– Before moving the appliance to the
work area, make sure that the handle
grip and caster wheel are both inserted
and locked.
– The operator must be in a position and
at a total distance which allows him/her
to have a full overview of the area in the
operating range of the appliance.
– Make sure there are no people or ani-
mals within the operating range of the
appliance.
a
WARNING
Avoid any steep slopes as there is the risk
the appliance could overturn.
