Klimawent
– the warranty of highest quality at attractive price
05.11.2019
Filtering unit
SPLENDID VAC 200
7 z 8
Photo No.2
– Example of application of the device for longitudinal welding
TROUBLESHOOTING GUIDE
Table No.5
Problem
Possible reason
Corrective action
1.
the suction capacity decreases an obstacle element / barrier throttling unclog the nozzle / hose
along with the increased noise the air flow got stuck in the nozzle or
level
suction hose
2.
impurities are emerging
the filter is faulty
replace the filter
outside the device
the waste container is not covered
close correctly the waste container
tightly
MAINTENANCE
In the course of operational use, maintenance consists in periodical emptying the waste container, systematic
filter cleaning and replacement of the cartridge filter. The cartridge filter ought to be replaced every 12
– 24 months,
depending on the intensity of use. The construction of the device ensure its operational use without continuous
everyday technical supervision. In case when defective function is by noise or visually noticed
– undertake its
revision. During the revision check: the state of the filter, technical state of the suction turbine
– according to the
appropriate rules of operational use of electrical drive devices, as well as check the electrical and pneumatic
connections.
Revisions ought to be carried out exclusively at the device disconnected (unplugged) from the power
supply system and from the external pneumatic installation.
OCCUPATIONAL HEALTH AND SAFETY
For the safety reasons, connect the device to the power supply according to the being in force regulations within
the range of personal protection against the electrical shock and the short-circuit- and overload effects.
Any connection activities ought to be executed by a person of adequate qualifications.
Circuits of the sockets
ought to be equipped with short-circuit- and differential-current protections
(
see Connection Diagram
).
The appliance meets the requirements of the 2006/42/EC Directive and do not require additional
protections for a safe operational use
.
CAUTION
:
Any repair ought to be performed after the fan is switched off and disconnected from the
power supply system
. In overall, follow strictly the general rules of Occupational Health and Safety.
