Klimawent SMART-160/3000-N, Руководство по эксплуатации и обслуживанию, Страница: 17 / 20

17
31.05.2019
RADIAL ROOF FANS
SMART-N
10. Occupational Health and Safety
Start up and the operational use is only admissible exclusively after getting acquainted
with the contents of the present Use and Maintenance Manual
. The fan will not cause any
hazard to User / personnel, if it is stably installed on the roof base or another supporting struc-
ture of appropriate load carrying capacity.
Connect the fan to the power supply system, strictly according to the enclosed Connection Dia-
gram and the guidelines shown in Section 6 of the present
Use and Maintenance Manual.
Connection to the power supply system ought to be carried ou by an
authorised person with qualifications, according to the valid regulations within the ran-
ge of Occupational Health and Safety
.
In the course of operational use, examine the connection of the PE protective cable. Any revi-
sion activity and
repair can be executed after the device is disconnected from the power supply.
11. Transport and Storage
The fans have to be transported on pallets and protected with foil. During loading/reloading and
transport the device must not be neither thrown nor knocked down. Do not put any additional load
on the device. It is inadmissible to put one device on top of another (no stacking).
During the transport protect them from atmospheric factors and from mechanical damage.
The fan should be stored in dry rooms and in areas of efficient ventilation.
The vertical transport to the site of use
(roof of the building)
has to be carried out after the hood
is taken off. For lifting and horizontal transport, connect the carrying lines to the transport eyes.
As the impeller is uncovered ( without the hood ) , lifting and vertical transport have to be
carried out especially with precautions .
12. Terms of warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”. The war-
ranty does not comprise:
● mechanical damage and dysfunctions caused by User,
●
device failures caused during use which was in contradiction with the purpose of operational
use and the present Use and Maintenance Manual,
● any damages being caused during the improper transport, storage or incorrect maintenance.
Infringement of the Section 3 “Reservations of producer” of the User’s Manual and espe-
cially modifications
undertaken by User on one’s own or operational use that is in contra-
diction with its purpose shall cause the loss of warranty validity .