12
AIRFLOW REGULATION
MAINTENANCE
MAINTENANCE AND
OPERATION
Constant volume dampers are designed with fully enclosed drive
mechanism outside of the duct and as such do not require cleaning
and regular maintenance.
However, activation mechanism should be inspected for proper
operation on regular basis.
•
Provide at least one annual check of the damper
•
After each intervention, provide a systematic cleaning of dust
•
Cleaning instruction: clean with a sponge, with water or a mild
detergent
•
Disinfection instruction: spray disinfectant (desinfectant may con-
tain alcohol which is flammable, take precaution to avoid ignition)
It is not permitted to alter the dampers in any way nor perform any
changes to their structure (except for the service procedures described
in this manual) without the manufacturer’s consent.
Provide at least one annual check of the damper.
COMMISSIONING
•
Carefully unpack RKP-P - be careful of sharp edges and do not
use excessive force for unpacking
•
Inspect the product - check the volume flow damper for damage
•
Installation of the volume flow damper - according to the
installation instructions (
)
•
Before commissioning - check the product functions
TRANSPORT
After arrival, check the damper for transport damage and
shortcomings. In case of any damage or shortcomings,
immediately contact your supplier.
STORAGE
If the damper is not installed immediately:
•
Remove any wrapping.
•
Protect damper from dust and contamination.
•
Do not expose the damper to the effects of
weather - store the damper in a dry place.
•
Do not store the unit below -20 °C or above 50 °C.
Please properly dispose of packaging material!
The functional test must be carried out in compliance with the basic
maintenance principles of the European norms EN 13306, EN 15423
and EN15650.
