JL-JK-OBA
Installation and Operation Manual
PG 22/35
REV: A (1/21/2019)
9.2.
Attach Compressor(s) onto Skid Plate Bracket (JK-101)
9.2.1.
#9, #15, & #21 mount Compressor(s) to JK-101 with head(s) of Compressor(s) facing
outwards, as shown in Figure 3 below.
9.2.2.
Ensure Compressor is oriented properly, with output “leader” hose facing inward, as show
n below.
Figure 3 - Compressor Mounted onto JK-101 **JK6450 Upgrade Shown
Figure 4 - Compressor Fasteners Orientation (Stack-Up)
9.2.3.
Tighten all fasteners firmly, or if accurate Torque Wrench is available to 28-32 in-lbs.
9.2.4.
Install Air Compressor filter(s) to each Compressor, or if preferred to mount filters remotely, attach
threaded barb to front of compressor inlet.
9.2.5.
To mount Air Compressor filter(s) remotely, follow instructions included in Air Compressor box.
(Top Down Order)
Nut (#9)
Lock Washer (#21)
Washer (#15)
