Klemsan TES-4, Руководство пользователя

Страница: 7 / 35

SECTION 2 DEVICE SPECIFICATIONS
2.1 Definition on Device
U1-U2 Input:
TES-4 is powered on from U1-U2 input. 18 ... 50V AC/DC must be
applied.
RST Button:
Press briefly (<5sec) to restart TES. Press and hold (≥ 5sec) and TES will restart by returning
to the factory settings.
ON LED:
When the LED color is orange, that means device is powered on from only U1-U2
input. When the LED color is blue, that means Micro-USB cable is connected to TES-4.
RX/TX LED :
These LEDs are orange when the data is sent from the serial line or sent to the serial from
the device.
Figure 2-1 Definitions on TES-4
Power Input
Reset Button
ON LED
Ethernet Port
RX/TX LED
USB Port
RS485
Terminals
Transparent Ethernet /
Serial Gateway
TES
Transparent Ethernet /
Serial Converter
7
SECTION 2 DEVICE SPECIFICATIONS
TES