28
INFO
(InFo)
Informing
UEr
Firmware version information
Table 3-1 SETTINGS Menu tree
3.8 Value Changing
There are 2 different value changing menus:
•
Multiple choice menus:
Theese menus enable predefined options. In these menus, press the
right button so that the first option of the menu starts to blink. Press the up/down buttons
so that the option starts blinking in the screen. Then, press the left button to complete the
selection.
•
Menus where digital values are entered:
Browsing among the steps, this menu enables to set
the value of your choice. Press the right button so that the first step from the left of the variable
starts blinking. Right button enables to switch among the steps. Press the up/down buttons to
change the value on the active step. When the values on the step are set and the variable is set
to the number of your choice, press the left button to complete the selection.
If a change is made in the settings, when you return to the “SETTINGS” menu,
saving procedure is enabled asking whether or not to save the changes. See: Saving
Procedure. If the changes are saved, the device is restarted.
“SETTINGS” menu includes the following subtitles:
3.9 Main Settings (Basic)
This menu enables to set the current transformer ratio and voltage transformer ratio. See table 4
for the menu tree, table 6 for step ranges.
Current transformer ratio (Ctr):
Current measured via current inputs is multiplied by the current
transformer ratio (Ctr) and shown in the indicators and modbus addresses.
Voltage transformer ratio (Utr):
Voltages measured via voltage inputs is multiplied by the
current transformer ratio (Utr) and shown in the indicators and modbus addresses.
3.10 Alarm Settings (Alarms)
This menu enables to set the alarm limits, hysteresis valu and alarm delay times. See table 4 for
the menu tree, table 6 for the step ranges.
SECTION 3 MENUS
Содержание POWYS 1012
