15
GPRS/SerialGateway
3.1.2 Connection with GPRS
All settings except the APN settings can be read and changed when connected to the
GTOR via GPRS. APN settings can only be read. Information on the information tabs
(Device Information and GSM Info) can only be read. When the “Connect with GPRS”
button is pressed, first the static IP of GTOR and the security code assigned to the port
number and GTOR to be connected must be written.
Figure 3-5 Connect with GPRS
NOTE:
The IP address of the SIM card, as well as the port and password information of the
device are required for this feature to be available. The device default port is set to ‘502’ and
the password is set to “Klemsan”.
NOTE:
When the device is accessed with GPRS, the time starts again when reading or writing
is done within the remaining time of the connection timeout (5 min.). When this time is up,
communication with the device is terminated automatically.
After the communication settings are done, “Connect” button must be pressed.
When “Connect” button is pressed, GTOR data is read and it goes to “Device Information” tab..
3.2 Device Information
This tab contains information on GTOR. In the “Product Information” section, there is
information about the product, in the “Production Information” section, there is production
information about the production.
Figure 3-6 Device Information
SECTION 3 CONFIGURATION SOFTWARE
Содержание GTOR-4
