Kleinn Air Horns X3-KIT, Руководство по установке

Страница: 29 / 40

X3-KIT
Installation and Operation Manual
Go to Table of Contents PG 29/40 REV: BETA (4/25/2019)
8.8.3. Install Air Compressor on to X3-101 Bracket using hardware included inside Compressor packaging, as
shown below. F
inal torque all bolts . Connect previously routed 1/4” Air Tubing to Leader Hose end.
Figure 21 – Installing Air Compressor onto Bracket; Exploded View
8.8.4. Install Air Compressor Air Filter onto end of Compressor, per included directions in Compressor package.
NOTE: if desired, select a dry location with less exposure to dust, water and mud, then route remote Air
Compressor Filter and connect to end of Compressor.
Figure 22 – Air Compressor Filter Remote Tubing shown attached (example vehicle)
Air Filter Inlet
Remote Filter
Included in
Compressor
box
Connect to
1/4” Tubing
FRONT