RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
8
4
List of Tools & Supplies
4.1
Standard Tool List (Required)
1.
Basic mechanic’s 3/8” drive socket sets with extensions
•
Inch size sockets
•
Metric size sockets
2.
Basic mechanic’s combination wrenches (box/open-end)
•
Inch size wrenches
•
Metric size wrenches
3.
Basic mechanic’s screwdriver set (Philips, Flat Head)
4.
Diagonal cutter/wire cutter pliers
5.
Wire strippers
6.
Wire terminal crimpers
7.
Slip-joint pliers
8.
Vise grips or locking pliers
9.
Small pry bar or large flat blade screwdriver
10.
Utility knife
11.
Magnetic retrieval tool
4.2
Special Tool List (Recommended)
1.
10-100 ft-lbs. torque wrench
2.
20-150 in-lbs. torque wrench
3.
Multi-meter or 12V DC test light or equivalent
4.
Trim panel tool, for removing wiring and body clips, when needed
4.3
Shop Consumables List (Recommended)
1.
Quality electrical tape
2.
Di-electric grease for electrical connections
3.
Heat shrink tubing for electrical connections
4.
Medium-strength thread-locker (i.e., Blue Loctite® PN 242) or equivalent
5.
Low-strength thread-locker (i.e., Purple Loctite® PN 222) or equivalent
6.
Black/Clear silicone for drilling holes in body
7.
Sandpaper or wire brushes for installing ground wires
8.
Extra plastic zip ties > 6” long
9.
Extra NPT sealant (i.e., Kleinn Air Horn Juice, Teflon tape, etc.)
10.
Touch-up paint for frame/chassis/body (i.e., primer or black epoxy)
11.
Typical cleaning supplies
END OF SECTION
