GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
8
4
List of Tools & Supplies
4.1
Standard Tool List (Required)
1.
Basic mechanic socket sets with extensions
•
Inch size sockets
•
Metric size sockets
2.
Basic mechanic’s combination wrenches (box/open-end)
•
Inch size wrenches
•
Metric size wrenches
3.
Basic mechanic’s screwdriver set (Philips, Flat Head)
4.
Wire cutters / strippers
5.
Wire crimpers
6.
Tubing cutter
7.
Torque wrench; in-lbs & ft-lbs
4.2
Special Tool List (Recommended)
1.
Heat gun
2.
Retrieval tools (magnetic / gripping)
3.
Multimeter, 12V DC test light or equivalent
4.
Trim panel tools
5.
Universal joint socket adapters
6.
Short handle combination wrenches
4.3
Shop Consumables List (Recommended)
1.
Quality electrical tape
2.
Heat shrink tubing for electrical connections
3.
Removable thread locking compound
4.
Sandpaper or wire brushes
5.
Extra plastic zip ties > 6” long
6.
Extra NPT sealant (i.e., Kleinn Air Horn Juice, Teflon tape, etc.)
7.
Touch-up paint for frame/chassis/body
END OF SECTION
