Kleinn Air Horns GMTRK-3 Скачать руководство пользователя

Страница: 5 / 38

GMTRK-3

Install Guide

This Install Guide Replaces the

GMTRK-1 Installation Manual

REV: B (09/07/2022)

Application Chart

2.1

Bolt-On Vehicle List

GMTRK-3 is a 100% direct bolt-on aftermarket product for the vehicles listed below. Every effort has

been made to verify fitment on these vehicles in their factory condition.

MODEL YEAR

MODEL

DRIVE

ENGINE

BODY

TRIM

2007 -2018

Sierra 1500

ALL

2007 - 2018

Silverado 1500

ALL

2007 - 2020

Suburban

ALL

2007 - 2020

Tahoe

ALL

2007 - 2013

Avalanche

ALL

2007 - 2020

Yukon

ALL

2007 - 2020

Yukon XL

ALL

NOTE: Vehicle may require drilling holes for electrical ground points, wiring, switches, and on-

board air based on preference.

2.2

Excluded Vehicles

The following vehicles have been found to be

incompatible

with the designed kit:

Any 2007 Classic Model is incompatible with this kit.

2.3

Aftermarket Product Compatibility

NOTE:

Before installing this product on a vehicle with any aftermarket parts attached in regions shown

in this manual, thoroughly review this manual to verify necessary mounting points and overall space

exists. At the discretion of end-user/installer, included Brackets/components may require modifications

to attach to vehicles with aftermarket parts.

THIS VOIDS THE KLEINN WARRANTY.

NOTE:

Review this manual in full before unpacking items to verify correct space and mounting locations

exist with your aftermarket product(s).

To install this kit alongside your other aftermarket product(s),

modification to the included parts, your vehicle, or your aftermarket product(s) may be required.

END OF SECTION

Содержание GMTRK-3







































Результаты поиска

Содержание GMTRK-3

Отзывы:

Похожие инструкции для GMTRK-3

Бренды по названию

Популярные бренды

Kleinn Air Horns GMTRK-3, Инструкция по установке

Результаты поиска

Содержание GMTRK-3

Отзывы:

Похожие инструкции для GMTRK-3

Бренды по названию

Популярные бренды