GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
32
9.2
Horn Bracket Installation
The horn bracket attaches to the underside of the vehicle, behind the front bumper with the horns
directed to the passenger side as shown in the below figure.
Figure 31- Horn Bracket Installed Location, Behind Front Bumper
1.
Remove the front two (2) OEM engine shield bolts. The horn bracket will attach to these two
points with the circular standoffs contacting the engine shield. The below figure illustrates this
step.
Figure 32- Engine Shield Bolt Removal
