manualshive.com logo in svg

Klein 5000 V2 Series, Руководство по эксплуатации и обслуживанию

Воспользуйтесь руководством по эксплуатации и техническому обслуживанию для продукции серии Klein 5000 V2. Скачайте его бесплатно с нашего веб-сайта. Обеспечьте правильное обслуживание и работу своего оборудования с помощью этого руководства. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

xiv

Series 5000 V2 Sonar System Operations and Maintenance Manual

P/N 11214512, Rev. 04

Software License Agreement

This Software License Agreement is provided by Klein Marine Systems, Inc. 
(KMS) for end users of SonarPro

©

 software for the KMS Series 3000, UUV-3500, 

3900, 4900, 5000, 5000 V2, 5900, HydroChart 3500, HydroChart 5000, and 
D3500TF Sonar Systems.

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND 
CONDITIONS BEFORE USING THIS PRODUCT. IT CONTAINS 
SOFTWARE, THE USE OF WHICH IS LICENSED BY KMS, TO ITS 
CUSTOMERS FOR THEIR USE ONLY, AS SET FORTH BELOW. IF YOU DO 
NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, 
DO NOT USE THE SOFTWARE. USING ANY PART OF THE SOFTWARE 
INDICATES THAT YOU ACCEPT THESE TERMS.

LICENSE:

  KMS grants you a nonexclusive license to use the accompanying 

software programs(s) (the "Software") subject to the terms and restrictions set 
forth in this License Agreement. You are not permitted to lease, rent, distribute or 
sublicense the Software or to use the Software in a time-sharing arrangement or in 
any other unauthorized manner. Further, no license is granted to you in the human 
readable code of the Software (source code). Except as provided below, this 
License Agreement does not grant you any rights to patents, copyrights, trade 
secrets, trademarks, or any other rights in respect to the Software.

The Software is licensed to be used on any workstation or any network server 
owned by or leased to you, provided that the Software is used only in connection 
with one KMS Series 3000, UUV-3500, 3900, 4900, 5000, 5000 V2, 5900, 
HydroChart 3500, HydroChart 5000, or D3500TF Sonar System. You may 
reproduce and provide authorized copies only of the Software and supporting 
documentation for each such workstation or network server for this equipment on 
which the Software is used as permitted hereunder.   Otherwise, the Software and 
supporting documentation may be copied only as essential for backup or archive 
purposes in support of your use of the Software as permitted hereunder. You must 
reproduce and include all copyright notices and any other proprietary rights 
notices appearing on the Software and the supporting documentation on any copies 
that you make.

NO ASSIGNMENT; NO REVERSE ENGINEERING:

  You may not transfer 

or assign the Software and/or this License Agreement to another party without the 
prior written consent of KMS. If such consent is given and you transfer or assign 
the Software and/or this License Agreement, then you must at the same time either 
transfer all copies of the Software as well as the supporting documentation to the 
same party or destroy any such materials not transferred. Except as set forth above, 
you may not transfer or assign the Software or your rights under this License 
Agreement.

Modification, reverse engineering, reverse compiling, or disassembly of the 
Software is expressly prohibited. You may not translate or create derivative works 
of the software or the supporting documentation.

Содержание 5000 V2 Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для 5000 V2 Series

Бренды по названию

Популярные бренды

Загрузить еще бренды