![KLEIBER KG 315-K USB Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/kleiber/kg-315-k-usb/kg-315-k-usb_operation-manual_1977050020.webp)
6 Recording modes
Display measuring point:
752
R01 P001
, while pressing INIT
752
14 : 33 : 28
and
752
23 . 07 . 12
al-
ternating. If the measured point taken on the same day as the calendar is displayed, only the time is displayed.
In the configuration menu using the option date format, the date can displayed in the following variants:
752
23 . 07 . 12
or
752
12-07-23
or
752
07/23/12
.
6.3
Ways
In this mode, rectangular grids can be created, which are described by a Cartesian coordinate system. Each X
and Y value has its own free choosable name. Arbitrary points in a field can be made into a Route or multiple
Route. Additionally, grids have options, for example a user selection or different properties of the measuring
object.
In the default state the pyrometer shows
[[[[
Se l Ways
. Shows the pyrometer
[[[[
No Gr i d
, then are
on the device no Ways stored. In the case no temperature recordings are possible, until Ways are defined.
The definition can be created using the software KG 315 - K USB Pyroskop Control.
Overlong names
For most properties, at the creation of Grids and Routes the names can be freely selected. If these are
longer than eight characters, they are displayed as scrolling text. When viewing “Battery 01” while the selec-
tion of Grids, the following is displayed:
GrId
Bat tery
, then
GrId
at tery 0
and
GrId
t tery 01
. After that the scrolling text starts again.
6.3.1
Basic operation on menus
To start a Way and other action, usually, different choices are possible. It is represented in the seven-segment
display of the current menu item and in the dot-matrix display, the choice. The Basic operation is always the
same:
• With the buttons
+
and
–
can be switched between different choices.
• With the button SELECT
through the various menus can be switched to the next menu item. With the
confirmation of the last item, the menu is closed and the planned action is performed.
• With the button COM
through the various menus can be switched to the previous menu item and will
eventually leave the menu completely.
Other possible actions relating to a particular menu are described in the relevant section.
16
KG 315 - K USB