5 Operation
The minimum temperature can be chosen by pressing
+
and
–
between measuring range start and mea-
suring range end (or maximum temperature when available).
IMPORTANT:
If the measured value is beneath this minimum temperature it will not be stored!
5.3.6
Energy saving mode
The energy saving mode will shutdown energy intensive processes (e.g. LED displays). These status will be
reached after not using the instrument for the preset time (in seconds). The instrument will not shut down
completely and will be in measuring mode immediately after pressing the measuring button. The preset must
be less then the time preset in automatic shutdown.
Display:
0180
SaveT i me
Time until the instrument switches to energy saving mode can be chosen by pressing
+
or
–
in seconds.
5.3.7
Automatic shutdown
The instrument will shut down completely after not using it for the preset time (in seconds). After pressing the
measuring button the instrument will maintain a short self-test which will take a few seconds before reaching
measuring mode.
Display:
3600
Of f-T i me
Time until the instrument shut down automatically can be chosen by pressing
+
or
–
in seconds.
5.3.8
Temperature unit
Display:
C
TempUn i t
or
F
TempUn i t
To toggle between degree Celsius and degree Fahrenheit press
+
or
–
.
5.3.9
Measuring mode
Display:
C[[[
MeasType
or
P[[[
MeasType
or
A[[[
MeasType
The measuring mode can be selected by pressing
+
or
–
. Possible modes are:
C Continuous measuring: The measured values will be displayed continuously in the display as long as the
measuring key is pressed at the first step. The actually measuring value will be written to the storage if
the measuring key is pressed at the second step.
12
KG 315 - K USB
