Kleenmaid LEK37AWF4350, Инструкция по использованию и уходу

Страница: 11 / 24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
510954
Use and Care
Before Drying
Energy Saving Tips
•
Make sure the lint filter is always clean.
•
Do not overload the dryer.
•
Do not overdry items.
•
Remove items to be ironed while still damp.
•
Large loads of similar fabrics dry the most
efficiently. However, dry permanent press in
smaller loads to prevent wrinkling.
•
Use the correct cycle for the type of fabric being
dried.
•
Locate your dryer so the exhaust duct is as short
and straight as possible.
•
Do not open the door during the drying cycle.
•
Plan to do your laundry on low humidity days;
your clothes will dry faster.
•
Dry multiple loads of clothes one right after
another so dryer interior does not have to be
reheated for each load.
Helps and Hints
• The necessary suggestions and directions for
installation and proper exhausting are given in
the INSTALLATION INSTRUCTIONS which are
included with the dryer.
• Static electricity may cause garments of synthetic
fibres (as in lingerie) to cling together, especially if
they are overdried. The use of a liquid fabric
softener in the rinse water of the washer, or a fabric
softener sheet in the dryer, will soften clothes and
reduce static electricity.
• Do not wash or dry clothes that shed lint in the same
load with permanent press or knit garments.
• Remove permanent press loads immediately after
dryer stops.
• Follow the CARE LABELS on FLAME
RETARDANT, Scotchgard™, etc., garments for the
proper washing and drying.
To reduce the risk of fire, explosion, serious
injury or death, clothes which have traces of
any flammable substances such as cooking
oil, machine oil, flammable chemicals,
thinner, etc. must not be put into the dryer.
W131
WARNING