Page 68 of 72
Configuration (Radio / Bluetooth)
Radio remote control with IR / radio hand-held transmitter
In order for an IR / radio transmitter to control a MCU via radio, the remote control must be taught in the system. To
do this, the following steps must be performed on a connected radio receiver and the hand-held transmitter.
►
Press the button on the radio receiver until the LED flashes slowly.
►
Press and hold down button 1 and button A on the remote control until the LED on the remote control flashes
slowly (about 2 seconds)
►
Release button 1 and button A.
►
The LEDs on the hand-held transmitter and on the radio receiver confirm the registration with a quick flashing.
►
The LED on the radio receiver flashes slowly. Other hand transmitters can be registered.
►
Press the button on the radio receiver to end the registration.
Bluetooth remote with Smart App over Smartphone
For the remote control to work between the smartphone and the Bluetooth receiver, the smartphone must be
configured via an app with a QR code. Each pitch is assigned a QR code that is made available to the user.
To ensure the operation, the following steps must be performed with the mobile phone.
►
Mobile-App "Park and Smile air" must be installed on the mobile phone.
(available at Google Play Store and Apple Store)
►
Register parking
To do this, the QR code must be scanned
.
►
Activate Bluetooth on the smartphone
Smartphone automatically connects to the corresponding parking space
and now fulfills the same functions as the IR / radio remote control.
Содержание trendvario6X00
Страница 1: ...Service Manual trendvario6X00...
Страница 70: ...Page 70 of 72 Notes...
Страница 71: ...Page 71 of 72 Notes...