Klarstein 10032506, Руководство пользователя

Страница: 29 / 36

29
EN
TROUBLESHOOTING
Do not repair or disassemble the air conditioning by yourself. Unqualified repair will
lead to failure of the warranty card, and may cause damage to users or their properties.
Problems Reasons Solutions
The air
conditioning
does not work There is no electricity.
The water-full indicator will
flash.
The ambient temperature is too
low or too high.
In cooling mode, the room
temperature is lower than the
set temperature; in heating
mode, the room temperature
is higher than the set
temperature.
In dehumidification mode, the
ambient temperature is low.
Turn it on after connecting it to
a socket with electricity.
Discharge the water inside.
Recommend to use the
machine in at the temperature
of 7-35 °C (44-95 °F).
Change the set temperature.
The machine is placed in
a room with an ambient
temperature of greater than
17 °C (62 °F).
The cooling
effect is not
good. There is direct sunlight.
Doors or windows are open;
there are a lot of people; or in
cooling mode, there are other
sources of heat.
The filter screen is dirty.
The air inlet or outlet is
blocked.
Pull the Curtain.
Close doors and windows,
and add new air conditioning.
Clean or replace the filter
screen.
Clear obstructions.
Big Noise The air conditioning is not
placed on a flat surface.
Put the air conditioning on a
flat and hard place (to reduce
noise).
Compressor
does not work Frost production starts.
Overheat protection starts. Wait for 3 minutes until the
temperature is lowered, and
then restart the machine.