21
EN
1
2
Assembly
Removing the Mounting Bracket
In front of the appliance, you can see there is one screw fixing the mounting
bracket in each left or right opening.
Unscrew the two screws by Phillips screwdriver (Do not discard them), then
remove the pre-attached mounting bracket.
Drilling the Holes and Attaching the Mounting Bracket
Drill 3-5 (according to the model you have bought) 7/25 in (7mm) holes in
the wall.
Insert the wall anchors into the holes using a hammer.
Attach the mounting bracket to the wall by fastening the Anchor Screws into
the wall anchors .
