Klarstein 10030135, Руководство пользователя

Страница: 17 / 46

17
Cleaning and Maintenance
Cleaning
Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling
effect and energy saving. The interior of the freezer should be cleaned regularly to avoid odor.
Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for
cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for
natural drying before the power is turned on.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic solvents (such
as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean chest freezer considering that
this may damage the fridge surface and interior. Do not rinse with water so as not to affect the electrical insu-
lation properties. Please use a dry cloth when cleaning temperature control knob and electrical components.
Defrost
• Freezer shall be manually defrosted.
• Unplug the freezer and open the freezer door, remove foods and drawers before defrosting.
• Open the outflow holes and drainage holes (and place water container at the outflow holes).
• Indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice
scraper might be used to the accelerate de-icing process.
Stop using
• Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended
to reduce the frequency of opening door and do not put fresh foods into the freezer.
• Please unplug the freezer left unused for a long time for cleaning. Keep the door open to avoid the bad
odour.
• Do not turn upside, horizontally place or vibrate the freezer, the carrying angle can not be greater than 45°.
Please hold the door and hinge when moving.
Continuous operation is recommended when the freezer is started. Please do not move the freezer
under normal circumstances so as not to affect the freezer’s service life.