SONNENWIESE
PAGE 9
5000511/11.19
5.
Maintenance
Caution!
Always disconnect the device from the power supply.
The user/operator must ensure that the device is always in perfect condition when being
operated.
Ensure the technical installation are regularly checked and maintained.
When carrying out repair work or recommissioning, additional measures must be taken,
such as providing barriers to stop unauthorized persons accessing the device.
Only authorized persons are allowed to work on the device; please contact your
specialized dealer or KLAFS directly.
Do not carry out any procedure that may impair the safety of the device.
Use a safe ladder.
Only order original spare parts from your specialized dealer or directly from KLAFS. No
liability can be assumed if any other devices are fitted, other than the original high-intensity
lamps or ignition device.
Do not operate the device without device-specific filter disks.
5.1.
Opening/adjusting/closing the dust cover
Caution!
Before starting maintenance or repair work, disconnect
the device from the power supply.
1
1
2
Opening the dust cover
1.
Remove the safety screw (
1/1
) from the dust cover.
2.
Using both hands, lower the dust cover by
90 degrees (
1/2
).
Adjusting the dust cover
1.
Screw the two pressure spindles (
2/6
), the nuts (
2/5
) and
the washers (
2/4
) supplied into the hole.
2.
Check that the dust cover is positioned evenly and readjust it
using the two pressure spindles, if necessary. Secure the
pressure spindles (
2/6
) with the nuts (
2/5
).
Closing the dust cover
1.
Push the dust cover (
2/2
) up with both hands until it locks
into both clips (
2/3
).
2.
Tighten the safety screw (
2/1
) on the dust cover.
2
4
5
6
2
1
3
Содержание 7824
Страница 1: ...Operating Instructions SONNENWIESE...
Страница 29: ...SONNENWIESE PAGE 29 5000511 11 19...
Страница 30: ...SONNENWIESE PAGE 30 5000511 11 19...
