manualshive.com logo in svg

KLA Tencor P-16+, Руководство пользователя

Поделиться
Скачать
KLA Tencor P-16+ Скачать руководство пользователя страница 261

0142530-000 AB

KLA-Tencor Confidential

7-15

3/13/09

KLA-Tencor P-16+ / P-6 User’s Guide

Analyzing 3D Scan Data - 3D Analysis Screen Features

Activate 3D Glitch Removal Tool

. 

This button activates the 3D glitch removal option. The tool is used in the following manner:

1.

Activate the glitch removal button by clicking on it. A box is displayed at the bottom right of the 
top view of the 3D image.

2.

Drag the box over an area that presents the identical but correct formation of the area that 
contains the glitch. Resize the box to capture only those attributes and only the size that is to be 
corrected in removing the glitch. (See left side illustration below. Note that it is important to 
gather enough data points for the system to make the analysis and remove the glitch.)

3.

Right-click to display the right-click menu.

4.

Move cursor to 

Remove Glitches Within Cursors

 and choose the median filter to be used; 3 x 3, 

5 x 5, or 7 x 7. (See right side illustration above.) (For more information on median filters, see 
also 

Median Filter for 2D and 3D Data

 on page 3-45.)

5.

Move the box over the glitch area, placing it in the same relative position that the initial box was 
placed. (See left side illustration below.)

6.

Right-click to display the right-click menu. (See right side illustration above.)

7.

Move the cursor to 

Remove Glitches

 and click.(See right side illustration above.) The glitch is 

removed using the chosen filter and the data gathered in the first box.

Table 7.6

Analysis Side Toolbar Buttons (Continued)

Button

Description of Action

Place and resize glitch 
removal box in a position 
modeling desired data.

In right-click 
menu choose 
filter option.

Move the glitch 
removal box over 
the glitch area.

In right-click menu, choose 

Remove Glitches

.

Содержание P-16+









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды