KKT chillers vBoxX 10, Инструкция по эксплуатации

Страница: 8 / 82

8 / 82 83000602.Ke
1. Product description
Please read through all the points of this instruction manual before starting up the machine. You should pay
special attention to the sections on safety, starting up and operation. If you have any further questions about
your machine, please contact the KKT chillers service team (
see Table 1: Contact details)
1.1. Intended use
The vBoxX is a factory-tested, fully automatic compression chiller. The machine is used solely for cooling
liquids in accordance with EN 378-1. Ensure an adequate supply of cooling air. Only approved liquids may
be used. The vBoxX is suitable for both indoor and outdoor installation (note the optional packages).
The user (owner) is obliged to comply with the conditions specified by the manufacturer with regard to
operation, servicing and maintenance according to this instruction manual.
The user (owner) of the chiller, not the manufacturer, is responsible and liable for all personal injuries and
property damage caused by any use that is not intended (misuse).
Table 2 shows the general safety instructions of the chiller. These are attached to the outside of the machine
in a clearly visible position. A complete description of all hazard warnings is given in
Chapter 4.2 Hazard
Warnings .
Table 2: Safety instructions
Note and follow the instructions for use!
The machine must be safely disconnected from the power supply before it is
opened! Then wait for at least 2 minutes before opening the machine.
Warning! Electric shock! If the machine is only switched off at its main switch,
dangerous electrical voltage is still applied at several terminals in the control
cabinet.