When navigating the User Interface, you may choose to make single or multiple changes in one pass. Once you have
completed all desired changes, click the “Save” button at the bottom of the UI.
Password Change – If you wish to change the default password, you may do it here. The password must be exactly 8
characters in length and may include any combination of letter, characters and or numbers. Enter your desired password
into the “New Password” field and again in “Confirm New Password.” Both fields must match for the new password to be
saved.
Device Name – You may assign the device a name so it will be easily recognizable once connected to a computer. The
device name will also be shown on the Time Stamp when that option is enabled.
Clock Setting – The device date and time may be set manually by clicking on the first radio button and changing the date
and time settings. Alternatively, you may select the second radio button to allow the device to sync its date and time
settings with those on the computer to which it is currently attached. Neither time setting will be put into effect until the
“Save” button has been clicked, please keep this in mind especially when setting the time manually.
Recording Preferences:
Video Resolution – Select the radio button by either 1080P or 720P for your preference of video recording resolution.
Audio – Law Enforcement and Export models may have the option of including audio on the video recordings.
Select the appropriate radio button of your choice to either enable or disable this feature. If you do not have one of
these models, this option will be completely disabled and will not be visible in the UI.
Video Overwrite – When the memory has reach its capacity, you may choose to have the device either stop
recording or continually delete the oldest file and replace it with a new one. To stop recording and retain all files,
select the radio button by “Disable”; to continue recording and overwrite the older files with newer ones, select the
radio button by “Enable.”
Video File Length – The video files are managed by maximum length of the recording. You may select 5, 15 or 30
minute durations. Once a recording has reached that time limit, the recording will stop, be saved in the memory and
a new recording will begin at the prior ending point. If the Mode Switch is moved out of Record before that time limit,
the recording will stop at that point in time and save to the memory. If the memory is approaching capacity and Video
Overwrite is disabled, the recording will be cut short and saved such that the file will fit in within the remaining
memory.
Photo Resolution – The photo resolution is managed by the number of Megapixels. You may select 3, 5, 8 or 12
Megapixel resolutions.
Photos taken per Press – Either 1 or 3 photos can per taken by the device per single press of the Multi-function
Button when the Mode Switch is in Standby.
Vibration Alert – This option toggles whether the device will vibrate when switching modes or not. The device will always
vibrate when power is low.
On – The device will vibrate when entering Standby and Record modes and when switching Low Light mode ON or
OFF while in Record mode.
Off – The device will only vibrate to alert that the battery is low.
Date/Time Stamp – Enabling this option will place the date and time, from Clock Setting, into video recordings and photos
taken by the device.