REVERSE THE PROCEDURE TO LOWER TENT
Your tent includes:
2 x U-shape poles
1 x elbow pole
2 x adjustable thumbscrew poles
2 x porch poles
8 x guy ropes
20 x pegs
PITCHING INSTRUCTIONS
Harrier 4 Tourer Tent
Model No. KC077-032
Filename: 5240_KC077-032_Harrier 4 _Instructions_Update
Dimensions: 290mm W x 170mm H
Colour: Black
1. Select a dry, level site and clear any sharp objects
that may puncture the floor. Remove the tent from its
carry bag, untie fabric ties and unroll the tent.
2. Peg out all four corners, ensure each side is pulled
taut. Then peg out all the remaining pegging points.
3. Assemble the ROOF FRAME POLES (1 x Elbow +
2 x U-shape poles) by inserting the U-shape poles
into the elbow. Ensure the metal pins lock in to place.
Unzip the front door and secure assembled roof frame
to inner tent roof using the 8 hook and loop tabs.
4. Assemble 2 x ADJUSTABLE THUMBSCREW POLES.
If erecting alone, support the roof frame pole by
inserting a porch pole into the central hole. Insert the
adjustable thumbscrew pole tips into holes located
at either side of the roof elbow pole, stand up one at
a time. Adjust the thumbscrews to the appropriate
height so the tent fabric is taut.
5. Rope out the guy ropes and fine tune the tent so it
remains taut and positioned correctly.
6. Assemble 2 x PORCH POLES. To erect the porch,
insert the pole tip into the eyelets located at the
corners of the porch. Attach the guy ropes to the top
of the pole tip and peg out on a 45° angle. For extra
weather protection, move the porch poles in to the
two central eyelets, attach guy ropes to the two outer
eyelets and peg out with guy ropes.
To make sure the tent stays
in place insert the pegs into
the ground at a 45° angle,
not straight down.
2 x adjustable thumbscrew poles
2 x porch poles
Roof Frame Poles
1 x elbow + 2 x U-shape poles
