Battery Installation
1.
Parallel move the battery cover downward, and take it off.
2.
Insert the lithium battery along the battery jar and set it level, mind the front and reverse side of the battery.
3.
Fit on the battery cover.
Functions and Applications
1.
Outdoor Unit Starting Up
Connect to external power to start up. The power source is only battery, main MCU is woken about every one second.
Sleep mode is in saving power mode, red lamp flashes once every four seconds; when battery is in low power, red lamp
flashes every one second to remind you to charge
.
2.
Starting Up & shutting down
Install battery to handset, long press “Switch key” about 3 seconds to start up (about 1 second after shutdown), logo shall
be displayed on screen with a sound of “Beep”. Turn into standby mode.
Display: standby picture, signal sign, power sign, time & date
In this mode, the screen gets dark after several seconds and turn into power saving mode, the red LED flashes every 4
seconds. The screen would be lighted if press again.
When battery is in low power (≤ 1 bar), red LED flashes every one second. It remains you to charge it.
In standby mode, long press “Switch key” about 3 seconds to shut down.
3.
Night-vision
With night-vision function, even under the environment of extremely poor visibility, the outdoor unit can activate infrared
lamps and recognize clearly objects or people within the distance of 1.5meter (the best focus of this product is 0.8 meter).
In addition, under complete black condition, it displays black and white effects.
Note: Please keep the lens of infrared lamps clean.
4.
Menu Setting
When the screen lights up , long press “FUNC” key, enter into menu setting. Then press “FUNC” key in sequence, it would
respectively enter into “ Time Setting”→ “Ringing Setting”→ “Lock Delay Setting”→ “PIR Setting”.
5.
Date & Time setting
Press "↑/↓" key to choose the figure of date& time.
Press "
+
/-"key to adjust digit-size
.
Press "OK" key to affirm and turn back to standby condition.
