www.kitchenaid.com.au | www.kitchenaid.co.nz
Page | 6
Hood and cabinetry clearances (mm)
This appliance is not provided with a combustion
product discharge. It is recommended that it be
installed insufficiently aerated places, in terms of
the laws in force.
Gas appliance air shall not be contaminated.
As per AS/NZS5601.1 minimum clearance must be
maintained.
Clearance between the highest part of the
highest burner of the cook top and a range hood
or an exhaust fan (overhead clearance) shall not
be less than 60 mm for a range hood and not less
than 750 for an exhaust fan.
NOTE: In case of installation of a hood above the
cook top please refer to the range hood
instructions for the correct distance.
NOTE: Indicated clearance dimensions are
applicable to non – combustible materials.
If needing to install multiple Domino products in the same cut-out, the Domino Connector
481010793572 (not included) accessory must be purchased separately from the After-sales Service. In
addition, also order special kit 480121103229 in case of installation in a stone counter top.
