KitchenAid KGCV465MMT Скачать руководство пользователя страница 8

1-4

KITCHENAID WARRANTY

ONE-YEAR FULL WARRANTY

For one year from the date of purchase, when this appliance is operated and maintained according to instruc-
tions attached to or furnished with the product, KitchenAid will pay for factory specified parts and repair labor
costs to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated
service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON ELECTRIC ELEMENTS,

CERAMIC GLASS COOKTOP, GAS BURNERS, AND SOLID STATE TOUCH CONTROL SYSTEM

On electric ranges and electric cooktops, in the second through fifth years from the date of purchase, when this
appliance is operated and maintained according to instructions attached to or furnished with the product,
KitchenAid will pay for factory specified parts for any electric element to correct defects in materials or workman-
ship.

On ceramic glass ranges and ceramic glass cooktops, in the second through fifth years from the date of pur-
chase, when this appliance is operated and maintained according to instructions attached to or furnished with
the product, KitchenAid will pay for factory specified parts for the ceramic glass cooktop. KitchenAid warrants
that the ceramic glass cooktop will not discolor, the cooktop pattern will not wear off, the rubber seal between the
ceramic glass cooktop and porcelain edge will not crack, the ceramic glass cooktop will not crack due to thermal
shock and the surface unit elements will not burn out.

On gas ranges and gas cooktops, in the second through fifth years from the date of purchase, when this appli-
ance is operated and maintained according to instructions attached to or furnished with the product, KitchenAid
will pay for factory specified parts for any gas burner to correct defects in materials or workmanship.

On ranges and built-in ovens, in the second through fifth years from the date of purchase, when this appliance is
operated and maintained according to instructions attached to or furnished with the product, KitchenAid will pay
for factory specified parts for the porcelain oven cavity/inner door if the part rusts through due to defects in
materials or workmanship. KitchenAid will pay for factory specified parts for solid state touch control system and
Magnetron tube in combination ovens to correct defects in materials or workmanship.

SIXTH THROUGH TENTH YEAR LIMITED WARRANTY ON RANGES AND BUILT-IN OVENS

PORCELAIN OVEN CAVITY/INNER DOOR

On ranges and built-in ovens only, in the sixth through tenth years from date of purchase, when this appliance is
operated and maintained according to instructions attached to or furnished with the product, KitchenAid will pay
for factory specified parts for the oven cavity/inner door if the part rusts through due to defects in materials or
workmanship.

KitchenAid will not pay for:

1.

Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace
house fuses or correct house wiring, or to replace owner-accessible light bulbs.

2.

Repairs when your appliance is used in other than normal, single-family household use.

3.

Pickup and delivery. Your appliance is designed to be repaired in the home.

4.

Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God or
use of products not approved by KitchenAid or KitchenAid Canada.

5.

Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6.

Replacement parts or repair labor costs for units operated outside the United States or Canada.

7.

In Canada, travel or transportation expenses for customers who reside in remote areas.

8.

Any labor costs during the limited warranty periods.

KITCHENAID AND KITCHENAID CANADA SHALL NOT BE LIABLE

 FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this
exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state or province to province.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized
KitchenAid dealer to determine if another warranty applies.

If you need service, first see the “Troubleshooting” section of the Use and Care Guide. After checking “Trouble-
shooting,” additional help can be found by checking the “Assistance or Service” section, or by calling the
KitchenAid Customer Interaction Center, 

1-800-422-1230

 (toll-free), from anywhere in the U.S.A. In Canada,

contact your KitchenAid designated service company or call 

1-800-807-6777

.

Содержание KGCV465MMT

































Отзывы: