background image

PRODUCT MODEL NUMBERS

Side By Side Built-In Refrigerator

KBSD602E

KBSD606E

KBSD608E

KBSN602E

KBSN608E

Electrical: 

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply 

is required. It is recommended that a separate circuit serving only your refrigerator 
be provided. Use an outlet that cannot be turned off by a switch. Do not use an 
extension cord.

Water Pressure: 

A cold water supply with water pressure between 30 and 120 psi 

(207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have 
questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply:
IMPORTANT:

 The pressure of the water supply coming out of a reverse osmosis system 

gwoing to the water inlet valve of the refrigerator needs to be between 30 and 120 psi 
(207 and 827 kPa).

OPENING DIMENSIONS

To avoid tipping during use, the solid soffit must be within 1" (2.5 cm) 
maximum above the refrigerator. If the solid soffit is higher than 1" 
(2.5 cm) or one is not available, then the refrigerator must be braced.
If the anti-tip boards are needed, they must be attached to the rear wall 
studs 80" to 90" (203 cm to 229 cm) above the floor. See “Install Anti-Tip 
Boards” for more information.

NOTE:

 A clearance of 

Z\x

" (1.3 cm) above the top grille must 

be maintained in order for the top grille to be removed.

IMPORTANT:

It is recommended that you do not install the refrigerator near an oven, radiator, or 
other heat source.

Do not install in a location where the temperature will fall below 55°F (13°C).

Floor must support the refrigerator weight, more than 600 lbs (272 kg), door panels 
and contents of the refrigerator.

Model

Width A (as shown above)

Dimension B (as shown above)

36

35

Z\x

" to 35

C\v

(90.2 cm to 90.8 cm)

4" (10.2 cm)

42

41

Z\x

" to 41

C\v

(105.4 cm to 106.1 cm)

7

Z\x

" (19.1 cm)

48

47

Z\x

" to 47

C\v

(120.7 cm to 121.3 cm)

13

Z\x

" (34.3 cm)

NOTE:

 Flooring under refrigerator must be at same level as the room. Face of 

cabinetry must be plumb.

PRODUCT DIMENSIONS

The depth from the front of the top grille to the back of the refrigerator cabinet is  
5

C\₈

" (64.5 cm).

The power cord is 84" (213 cm) long.

Height dimensions are shown with leveling legs extended 

Z\₈

" (3 mm) below 

the rollers.

*When leveling legs are fully extended to 1

Z\v

" (3.2 cm) below rollers, 

add 1

Z\₈

" (2.9 cm) to the height dimensions.

SIDE VIEW

Because Whirlpool Corporation policy includes a continuous commitment to improve 

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation 

Instructions packed with product. Specifications subject to change without notice.

Ref. W10681447A 

7/15

Page 1 of 2

Отзывы: