KitchenAid Architect Series II KGRS807S Скачать руководство пользователя страница 1

30" Freestanding and Slide-In Gas Range

®

PRODUCT MODEL NUMBERS

OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

SLIDE-IN RANGE COUNTERTOP PREPARATION

KGRS807S
KGSK901S

KGSS907S

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

The cooktop sides of the slide-in range fit over
the cutout edge of your countertop.

If you have a square finish (flat) countertop
and the opening width is 30" (76.2 cm), no
countertop preparation is required.

Formed front-edged countertops must have
molded edge shaved flat 3/8" (1.0 cm) from
each front corner of opening.

Tile countertops may need trim cut back 

3/8" (1.0 cm) from each front corner and/or
rounded edge flattened.

If countertop opening width is greater than 
30" (76.2 cm), adjust the 3/8" (1.0 cm)
dimension.

Countertop must be level. Place level on
countertop, first side to side; then front to
back. If countertop is not level, range will not
be level. Range must be level for satisfactory
baking conditions.

Gas supply:

Use 3/4" (1.9 cm) rigid pipe gas

supply line to the range location. A smaller size
pipe on long runs may result in insufficient gas
supply. With L.P. gas, piping or tubing size can
be 1/2" (1.3 cm) minimum. If local codes
permit, it is recommended that new flexible
metal tubing, design-certified by CSA, 4-5 feet
(122-152.4 cm) long, 1/2" (1.3 cm) or 3/4" 
(1.9 cm) I.D., be used for connecting the range
to the rigid gas supply line. A 1/2" (1.3 cm)
male pipe thread is needed for connection to
pressure regulator female pipe threads. An
easily accessible individual manual shutoff
valve must be located in the same room, but
external to the range.

Electrical:

120-volt, 60 Hz, AC-only, 15 amp,

fused electrical circuit is required. A separate
circuit is recommended. A time-delay fuse or
circuit breaker is recommended. 

Ref. W10118262

04-18-07

18" (45.7 cm)
upper cabinet
to countertop

18" (45.7 cm)
upper cabinet
to countertop

13" (33 cm) upper

cabinet depth

13" (33 cm) max.

upper cabinet depth

30" (76.2 cm) min.

opening width

30" (76.2 cm) min.

opening width

For minimum
clearance to top
of the cooktop,
see NOTE.

For minimum
clearance to top
of the cooktop,
see NOTE.

30" (76.2 cm)
min. opening

width

30" (76.2 cm)
min. opening

width

This shaded area

recommended for

installation of

rigid gas pipe.

This shaded area

recommended for

installation of

rigid gas pipe.

This shaded area

recommended for

installation of

outlet or 

junction box.

This shaded area

recommended for

installation of

outlet or 

junction box.

Available area

for gas and electric

installation.

Available area

for gas and 

electric

installation.

8" 

(20.3 cm)

8" 

(20.3 cm)

8" 

(20.3 cm)

8" 

(20.3 cm)

Grounded

outlet

Grounded

outlet

7" (17.8 cm)

7" (17.8 cm)

1¹⁄

2

" (3.8 cm)

1¹⁄

2

(3.8 cm)

4¹⁄

2

(11.4 cm)

4¹⁄

2

(11.4 cm)

4¹⁄

2

(11.4 cm)

4¹⁄

2

(11.4 cm)

5" (12.7 cm) min.
clearance from
both sides of the
range to the side
wall or other
combustible
material. 

Cabinet door
or hinge
should not
extend into
the cutout.

Cabinet door
or hinge
should not
extend into
the cutout.

5" (12.7 cm) min. 
clearance from 
both sides of the
range to the side 
wall or other 
combustible 
material. 

¾" (1.9 cm) 

radius both corners

22

¹⁵⁄₁₆

" (58.3 cm)

opening depth

Freestanding Range

*Range can be raised approximately 1" (2.5 cm) by adjusting 

the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) 

countertop; front of oven door protrudes 1" (2.5 cm) beyond 
24" (61 cm) base cabinet.

Slide-in Range

*Range can be raised approximately 1" (2.5 cm) by adjusting 

the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) 

countertop; front of oven door protrudes 1

³⁄₄

" (4.4 cm) beyond 

24" (61 cm) base cabinet.

A.

5³⁄₄

" (14.6 cm)

B. 30" (76.2 cm)
C. 41

³⁄₄

" (106 cm) overall height 

with leveling legs screwed all 
the way in.

D. 36" (91.4 cm) cooktop trim 

height with leveling legs 
screwed all the way in*

E. Model/serial number plate 

(located on the right-hand 
side oven door trim)

F. 27

¹⁄₄

" (69.2 cm) max. from 

handle to standoff at back 
of range**

A

B

E

D*

C

F**

A. 30

⁹⁄₁₆

" (77.6 cm)

B. 35

⁵⁄₈

" (90.5 cm) height to 

underside of cooktop edge 
with leveling legs screwed 
all the way in*

C. Model/serial number plate 

(located on the right-hand 
side oven door trim)

D 30"  (76.2 cm)

E. 27¼" (69.2 cm) from 

handle to standoff at 
back of range**

F. 23" (58.4 cm) countertop 

notch to rear of cooktop

B*

D

A

E**

C

F

30"

(76.2 cm)

30 

³⁄₄

"

(78.1 cm)

³⁄₈

"

(1.0 cm)

NOTE: 24" (61 cm) minimum
when bottom of wood or
metal cabinet is protected by
not less than 1/4" (0.64 cm)
flame retardant millboard
covered with not less than
No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless
steel, 0.024" (0.6 mm)
aluminum or
0.020" (0.5 mm) copper. 

30" (76.2 cm) minimum
clearance between the top of
the cooking platform and the
bottom of an unprotected
wood or metal cabinet.

If installing a range hood or
microwave hood combination
above the range, follow the
range hood or microwave
hood combination 
installation instructions for
dimensional clearances
above the cooktop surface.

Отзывы: