8
| USING THE STAND MIXER
USING THE STAND MIXER
ASSEMBLING THE STAND MIXER
1
Check to be sure that the Stand
Mixer is unplugged, and the speed
control is turned to “0”�
2
Raise the motor head:
Slide the
locking lever to the unlock position
and lift the motor head�
3
Attach the bowl:
Place the bowl on
the bowl clamping plate and gently
turn it in a clockwise direction to
lock it into place�
4
Attach any accessory:
Slip the
accessory onto the beater shaft and
press upward as far as possible� Turn
the accessory counterclockwise to
hook the accessory over the pin on
the shaft�
NOTE:
To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction�
W11225091B.indb 8
5/10/2018 6:35:26 PM
