KitchenAid 5KFP1333 Скачать руководство пользователя страница 23

Страница: 23 / 24

ENGLISH

If your Food Processor should malfunction or fail to operate, check the following:

Food Processor doesn’t run:

• Make sure that the bowl and lid are

properly aligned and locked in place and

the large food pusher is inserted in the

feed tube.

• When using the large feed tube opening,

make sure that food is not above the Max

Fill line on the feed tube.

Food Processor not shredding or slicing

properly:
• Make sure the raised-blade side of the

disc is positioned face up on the common

adapter.

• If using the adjustable slicing blade, make

sure it is set to the correct thickness.

• Make sure ingredients are suitable for

slicing or shredding. See “Tips for Great

Results.”

If the work bowl cover won’t close when

using the disc:
• Make sure the disc is installed correctly,

with the raised nub on top, and is

positioned properly on the drive adapter.

Nub

Max Fill line on

feed tube

• Press only one button at a time.

The Food Processor will not operate if

more than one button is pressed at the

same time.

• Is the Food Processor plugged in?
• Is the fuse in the circuit to the Food

Processor in working order? If you have

a circuit breaker box, be sure the circuit

is closed.

• Unplug the Food Processor, then plug it

back into the outlet.

• If the Food Processor is not at room

temperature, wait until it reaches room

temperature and retry.

TROUBLESHOOTING

W10508883D_v08.indd 23

8/5/14 12:45 PM

Содержание 5KFP1333
























Результаты поиска

Содержание 5KFP1333

Отзывы:

KitchenAid 5KFP1333, Инструкция по эксплуатации, Страница: 23 / 24

Результаты поиска

Содержание 5KFP1333

Отзывы: