Kistler-Morse STXplus, Инструкция по установке и эксплуатации

Страница: 24 / 76

APPENDIX B: KISTLER-MORSE
®
PROTOCOL SERIAL COMMANDS
Response
The response to a request for gross engineering units is:
A(-)dddddddssr
If the weight is +6384, the response is:
A+0006384ssr
Calculating the checksum ‘ss’ as the sum of the Hex values of all characters between ‘A’ and
‘ss’:
+0006384 ASCII = 2B Hex+30 Hex+30 Hex+30 Hex+36 Hex+33 Hex+38 Hex+34 Hex = 190 Hex
‘+’ ‘0’ ‘0’ ‘0’ ‘6’ ‘3’ ‘8’ ‘4’
Ignoring the overflow, the checksum is 90 Hex. Therefore, the ASCII string transmitted back to
the master is:
A + 0 0 0 6 3 8 4 9 0 CR
41 2B 30 30 30 36 33 38 34 39 30 0D Hex
EXAMPLES
For each command below, the general format of the command is shown above the example.
‘#’ Command — Kistler-Morse
®
Product Identification Number
This command is sent by the master to request the STXplus to send its Kistler-Morse
®
product
identification code (code is 36 for the STXplus). For this example, the master requests the code
from an STXplus at address 01, which returns a code of 36 and a checksum of 69.
Request from Master Response from STXplus
>aa#ssr Addssr Format
>01#84r A3669r Example
‘u1’ Command — Request Raw Counts
This command is sent by the master to request the STXplus to send the raw A/D counts. The
range of this value can be ±8,388,607. For this example, the master requests the raw counts
from an STXplus at address 01, which returns a raw count of 1147226 and a checksum of 67.
Request from Master Response from STXplus
>aau1ssr A(-)dddddddssr Format
>01u107r A114722667r Example
‘u2’ Command — Request Filtered Counts
This command is sent by the master to request the STXplus to send the filtered A/D counts. The
range of this value can be ±8,388,607. For this example, the master requests the raw counts
from an STXplus at address 01, which returns a raw count of -17226 and a checksum of 2F.
B-5