KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-406D
KK-IC-406D (Electric Start)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 11 of 56
Assembly Instructions
1.
Fix the main machine; insert the hexagonal output shaft o
nto stepped box’s output
casing’s hexagonal hole.
2.
Fix the hexagonal stop casing onto the hexagonal output shaft with M6×6 socket
head screws, and make sure the hexagonal shaft does not move axially.
3.
Wheel fixing
: fix the wheels at the two sides of the hexagonal output shaft and fix
them with two M8×55 bolts and M8 nuts.
4.
Trailer fixing
: Fix the link group onto the trailer, use the link shaft assembly for
connection, insert the split pin ¢3×26 and insert the velocity adjustment screw into
square groove of the link group, and fix it with M8×55 bolts and nuts.
5.
Handlebar fixing
: Two gear discs of the handlebar support aim at the discs of the
handlebar support base and adjust the positions. Fix them with M16×140 bolts, flat
gasket 16 and spring gasket16.
6.
Shifting bar assembly
: Get the shifting bar through the groove of shift support in
the handlebar support base and insert it into the hole of the shift casing, then fix it
with split pin ¢3.2 ×16. Set the shifting bar in neutral position.
Note
: This picture shows
KK-IC-406D
. The
output of the PTO shaft is connected to the
gearbox of the Inter-cultivator.
This feature results in improved engine
performance
