Kirstein Pronomic XL-12M1, Руководство по эксплуатации

Страница: 7 / 10

Pronomic XL-12M1
2020-01-28 Pronomic XL-12M1 / ArtNr.: 00055469 5
Power Supply
Check that the mains voltage corresponds to 100V(120) / 220(240)V 50/60Hz.
By using other voltages than specified the equipment can be irreparably damaged.
The equipment must be directly connected to the mains.
SAFETY
Before fitting or removing the unit, ensure that the power cord
is disconnected from the mains.
Make sure that the unit is positioned so that no one can trip
over the power cord.
Power supply / power cord (devices with power cords/power supplies):

Use only the voltage specified as correct for the device. The required voltage
is printed on the type plate of the device.

Check the power cable from time to time regarding dirt, damage or other
influence.

Use only the included power cord / power supply or adaptor.

Do not place the power chord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord, place
heavy objects on it, or place it in a position where anyone could walk on, trip
over, or roll anything over it.

When removing the electric plug from the device or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.

Remove the electric plug from the outlet when the device is not to be used
for extended periods of time, or during storms.

To avoid generating unwanted noise, make sure there is adequate distance
(50 cm or more) between the AC power adaptor and the device. Do not
cover or wrap the AC power adaptor with a cloth or blanket.