Kirsch Shadings Series, Руководство по установке

Страница: 13 / 19

12
INSTALLATION
OPERATION
Basic Operation
To Lower the Shading
■ ■
Briefly pull the wand down to move the shading in the down/closed position.
■ ■
The shading will move to the fully closed position.
To Open the Vanes
■ ■
With the shading fully lowered, briefly pull the wand down to open the vanes.
To Close the Vanes
■ ■
With the shading fully lowered and vanes open, briefly push the wand up to close the vanes.
To Raise the Shading
■ ■
Briefly push the wand up to move the shading in the up/open direction.
■ ■
The shading will move to the fully open position.
To Stop the Shading
■ ■
While the shading is in motion, pull down (or push up) the wand and release to stop shading or
vane movement anywhere along its travel.
Express Mode
Activating Express Mode will send the shading to the vanes fully open position or shading fully open position, bypassing the vanes
fully closed position.
Go to Vanes Fully Open Position
■ ■
With the shading stationary, pull and hold the wand down. The shading will begin to move.
■ ■
The shading will pause momentarily and then continue to move.
■ ■
Release the wand.
■ ■
The shading will move to the vanes fully open position.
Go to Shading Fully Open Position
■ ■
With the shading stationary, pull and hold the wand down. The shading will begin to move.
■ ■
The shading will pause momentarily and then continue to move.
■ ■
Release the wand.
■ ■
The shading will move to the vanes fully open position.
Set and Go to a Favorite Position
NOTE: The default favorite position is the vanes closed and the shading at 50% open.
Set a Favorite
■ ■
Put the shading in motion. With shading still in motion, as it reaches the desired Favorite position, push the wand up (or pull
the wand down) and hold for approximately 4 seconds.
■ ■
The shading moves slightly twice (down, up) to indicate a new Favorite position is set.
Go to Favorite
■ ■
With the shading stationary, or moving — in a single motion, quickly push the wand up and pull the wand down and release.
The shading will move to the Favorite position.
NOTE: Quickly pulling the wand down and pushing the wand up will also work.
Lower
Shading
Open
Vanes
Close
Vanes
Raise
Shading