Automation III Gateway
QUICK START GUIDE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/tv technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
• Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
• L’utilisation de ce ispositive est autorisée seulement aux conditions suivantes: (1) il ne doit pas
produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
CE Statement
Kirsch
®
, One Duette Way, Broomfield, CO 80020, USA
Kirsch hereby declares that the Automation Gateway is in compliance with the
essential requirements and other relevant provisions of Electromagnetic Compatibility
(EMC) Directive 2014/30/EU and Radio Equipment Directive (RED) 2014/53/EU. A copy
of the DoC can be obtained online:
www.kirsch.com/window-coverings-product-manuals
© 2022 Kirsch Custom Window Coverings. All rights reserved. All trademarks used herein are
the property of Kirsch or their respective owners. 5/22
K
IR
S
CH
®
A
U
T
O
M
AT
IO
N
I
II G
AT
E
W
A
Y
A view of your Kirsch
®
Automation III Gateway
Power
Port
P Button
R Button
