Kirkland Signature 720-0193, Инструкции по сборке и эксплуатации

Страница: 10 / 43

ASSEMBLY INSTRUCTIONS
7
STEP4: Find the 4 screws used to attach the left and right push bar brackets. Align the holes
for each bracket with the holes on the right panel beneath the push bar. Insert the screws and
loosely attach the brackets. Locate the 2 screws which will attach each bracket to the push bar
itself, as shown in the diagram below. These screws will install from the under side of the push
bar through the hole in each bracket. Insert the screws and then tighten the screws attaching
each bracket to the right panel. then put the service tray on it.
2 sets each side
100
200
300 400
500
600
700
800
100
200
300
400
500
600
700
800