7
8
4.2 Adjust Volume
Press the preprogrammed
“Squelch Off ” button to hear
background noise. Then
rotate the On/Off/Volume
control knob to adjust the
volume.
4.3 Select a Channel
Rotate the channel selector
knob to select the required
channel. You will hear voice
f r o m t h e s p e a k e r w h i l e
receiving valid signals.
4.4 Make a Call
To make a call, select
the desired channel,
press and hold the PTT
button, and speak to the
microphone in normal
voice. Please keep your
mouth 5-10cm away from
the microphone.
4.5 Receive a Call
Release the PTT button to receive a call.
Your dealer can set CTCSS/DCS signaling on your
radio channels by PC software. If you select a
channel that has been preset with the signaling, you
will not hear other calls except those from your own
system.
5. Functions of
Programmable Buttons
The dealer can assign one of the following
auxiliary functions to the top button, side button 1 or
side button 2.
Description
Description
No function is assigned.
Press the preprogrammed
“ L o n e Wo r k e r ” b u t t o n t o
start/stop lone working.
Press the preprogrammed
“Emergency Alarm” button to
make an alarm tone according
to t h e s e t t i n g of the pro-
gramming software or send
your ID or background sound
to your partner or the system.
Press the preprogrammed
“Emergency Alarm Off ” button
to quit the Emergency Alarm
Mode.
Press the preprogrammed
“Scan” button to start/stop
scanning.
Press the preprogrammed
“Voice Annunciation” button to
change the language and
mode of voice annunciation,
meanwhile, the current channel
number can be heard.
When the preprogrammed
“Talkaround” button is pressed,
the next transmission will be at
the same frequency as at
which it is received.
Function
Function
None
Voice
Annunciation
Lone Worker
Emergency
Alarm
Emergency
Alarm Off
Scan
Talkaround
No.
No.
0
3
1
2
4
5
6
