Kirby Morgan 17A/B Скачать руководство пользователя страница 1

 

Kirby Morgan, SuperLite, Band Mask, KMB Band Mask,  EXO, SuperMask, SuperFlow, and Rex  are all registered trademarks of 

Kirby Morgan Dive Systems, Inc.  Use of these terms to describe products that are not manufactured by KMDSI is not permitted without 
written permission from KMDSI. 
       © Copyright 1970-2018 Kirby Morgan Dive Systems, Inc.  All rights reserved.  KMDSI manuals, checklists and technical and training 
information is made available for the express use of owner/user of this Kirby Morgan products.  No part of this material may be reproduced, 
stored in any retrieval system, or transmitted, or used in any form or by any means, whether graphic, electronic, mechanical, photocopy, or 
otherwise by technology known or unknown, without the prior written permission of Kirby Morgan Dive Systems, Inc 

Copyright 2003-2017, Dive Lab®., Inc. All rights reserved.  TechTrnG 03101 

 
 

Pa

ge 

1

 

KIRBY MORGAN SUPERLITE DEEP SEA DIVING HELMET MODELS   

17A/B, 17C, 17K, 27, KM-37/SS, 47, 57, 77, 97 

KMB 18/28 Band Masks 

SUPERVISORS IN-WATER CHECKS 

APPENDIX A2.5  

 

04-09-18 

WARNING:

   These are recommended minimum checks when using Kirby Morgan Helmets or 

Band Masks.  Additional checks may be required as dictated by the conditions and 
tasks being performed.  Failure to perform in-water checks may result in serious 
injury or death.  See Modular Operations and Maintenance Manual for air supply 
requirements. 

CAUTION:

   Diving  with  Kirby  Morgan  Helmets  must  include  a  fully  functional,  properly 

maintained Emergency Gas System (“EGS”).  The EGS should be maintained in 
accordance with the Modular Operations and Maintenance Manual(s). 

WARNING:   

If diving is conducted with less than the minimum recommended supply pressure, 

the diver must tailor the work to prevent over breathing the system, resulting in 
exhaustion. 

Date: 

Helmet Serial #: 

Associated Equipment Serial #(s): 

Technician 

(print name):

 

 

STEP 

PROCEDURES 

INITIALS 

1.  Check Breathing 

Diver: 

Ensure Helmet is breathing properly.  Set 
the Demand Regulator Adjustment Knob 
for minimum inhalation effort.  Report:  
Breathing OK 

 

Отзывы: