- 55 -
Frequency of check
1. Check completely all abnormalities
found during previous operation.
2. Go around the tractor and check the
following points
1 ) Air pressure, wear and general
condition of tires
2 ) Oil or water leakage
3 ) Amount of engine oil and
degree of contamination
4 ) Amount of transmission oil and
degree of contamination
5 ) Amount of fuel and coolant
6 ) Condition of dust cup in air
cleaner
7 ) Tractor body for damage,
loosened bolts and nuts
8 ) Condition of lamps
9) Dirt or damage of the number plate
10) Amount of break oil and degree
of contamination
3. While in the driver’s seat check the
following.
1 ) Operation of brake pedals and
clutch pedals
2 ) Operation of parking brake
3 ) Operation of steering wheel
4) Dirt on lamps and operation of
lamps
5) Operation of all meters and gauges
6 ) Color of exhaust gas
7 ) Operation of flashers
1. Lubrication
1) Front axle (on right and left sides)
2 ) Front, rear bracket
3 ) Lifting rod
4 ) Steering cylinder pin
5 ) Top link holder
6 ) Position adjusting support
7 ) Top link
2. Check to make sure fixing screws of oil
pressure pipe and fuel pipe are tight.
Check
See page 41
The oil level must be between
the two marks on the dipstick.
Stop the engine while adding
oil.
Apply a small amount of
chassis grease.
Notes
Remarks
Daily checks
(check every-time
prior to use)
Every 50 hours
