PPC-6101
All-in-One CPU Board Series User’s Manual
Jumpers and Connectors
27
Example program;
Out-0, Out-1
Turn On
Out 123h, 03h
Out-2, Out-3
Turn Off
Out-0, Out-2
Turn Off
Out 123h, 0Ah
Out-1, Out-3
Turn On
Example program;
If INPUT 123 is
(1011), then INPUT-2 is “0”
If INPUT 123 is (1100), then INPUT-0 & 1 are “0”
** The INPUT signal has to be TTL signal
3.4.7 ATX Power On /Off Button: CN9
This 2-pin connector,
CN9
, connects the ATX power button of the front
panel to the Board allowing user to control the power on/off state of the
ATX power supply. This jumper is only useful when installing an ATX
power supply.
Pin Signal
Name
1
GND
2
PW_BN+
