manualshive.com logo in svg

Kinova JACO, Руководство пользователя

Поделиться
Скачать
Kinova JACO Скачать руководство пользователя страница 28

Jaco® assistive robot User guide

24

 OLED display accessory

 OLED:  General information

The Kinova OLED display is an optional accessory that was designed to make the control of the
robot more intuitive by providing users with a visual reference of the current modes and status of
the robot.

The display was designed to be used with Kinova’s Universal Interface. Using the display without
the Universal Interface device may result in undesired behavior. The device connects to the
universal interface using Kinova’s standard circular connectors. The device communicates with the
robot by using Kinova’s proprietary CAN communication protocol.

 Dimensions

The OLED display is the size of a smart phone.

Figure 3: Display module dimensions

 All dimensions are in mm.

 Identification of parts

The OLED display has a simple interface.

+1 514-277-3777 

kinovarobotics.com

© 2021 Kinova inc. All rights reserved.

Содержание JACO






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды